Captdave
Titanium
- Joined
- Sep 24, 2006
- Location
- Atlanta, GA
Once in a while the spindle will have trouble changing speeds, the load meter goes to 100% and sounds like the spindle and drive are fighting each other. Sometimes its only for a second or 2 then runs fine other times it will keep doing it till it alarms out with 23 on the spindle drive and 56 on the main board.
When it alarms out the only way to clear it is to shut down the control and restart then runs fine.
Any thoughts?
QT-8
T32-B
When it alarms out the only way to clear it is to shut down the control and restart then runs fine.
Any thoughts?
QT-8
T32-B