tylerfavor
Plastic
- Joined
- Oct 27, 2020
We have an FH-6000 with Fusion 640m controller and built in tool setter. The tool setter is off about .028". Is their a parameter I can change to adjust this so I get good numbers?
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Largest Manufacturing Technology Community on the Web
Stay Connected:
Fusion 640M Tool Setter calibration
- Thread starter tylerfavor
- Start date
- Replies 2
- Views 1,854
toolsteel
Titanium
- Joined
- Nov 9, 2012
- Location
- NW Wisconsin (BFE)
All Mazaks I have messed with had parameters for adjusting the tool setter.
I believe it is a B parameter.....B63...B65.....something like that. Check the manual. they are a metric value.
I believe it is a B parameter.....B63...B65.....something like that. Check the manual. they are a metric value.
tylerfavor
Plastic
- Joined
- Oct 27, 2020
I dont seem to have any B parameters.
I found parameter R2392 "Z AXIS SKIP POSITOIN" in the electrical manual but i cant find the parameter in the machine control.
Image of parameter listed in electrical manual.
PXL_20201028_135528006.jpg - Google Drive
I found parameter R2392 "Z AXIS SKIP POSITOIN" in the electrical manual but i cant find the parameter in the machine control.
Image of parameter listed in electrical manual.
PXL_20201028_135528006.jpg - Google Drive
