Fusion 640t issue
Close
Login to Your Account
Likes Likes:  0
Results 1 to 8 of 8
  1. #1
    Join Date
    Apr 2013
    Location
    South Australia
    Posts
    463
    Post Thanks / Like
    Likes (Given)
    122
    Likes (Received)
    148

    Default Fusion 640t issue

    G'day all,
    i have just purchased a Multiplex 6100y with Fusion 640 control. Finally got it powered up and wont even boot to windows. It's asking to either press F1 or F10. Unfortunately i cant find anywhere that i can plug a keyboard in. It doesn't have the keyboard or mouse option installed and there are no ports in or around the back of the controller or screen. Any ideas from the brains trust??

    Cheers Bob

  2. #2
    Join Date
    May 2020
    Country
    UNITED STATES
    State/Province
    Indiana
    Posts
    21
    Post Thanks / Like
    Likes (Given)
    1
    Likes (Received)
    4

    Default

    If it's the same as mills with the same control there will be a ps2 connector inside the panel. You should be able to hook up an older keyboard this way. Its really hard to spot though. The port is not perpendicular to the board sticking away from it. Your plug will be parallel to the motherboard. Kind of on the bottom rightish area of a 510C board.

  3. #3
    Join Date
    Apr 2013
    Location
    South Australia
    Posts
    463
    Post Thanks / Like
    Likes (Given)
    122
    Likes (Received)
    148

    Default

    Quote Originally Posted by Nagol View Post
    If it's the same as mills with the same control there will be a ps2 connector inside the panel. You should be able to hook up an older keyboard this way. Its really hard to spot though. The port is not perpendicular to the board sticking away from it. Your plug will be parallel to the motherboard. Kind of on the bottom rightish area of a 510C board.
    Thanks for the reply. I have had a fairly thorough look but will go and look again.

  4. #4
    Join Date
    Apr 2013
    Location
    South Australia
    Posts
    463
    Post Thanks / Like
    Likes (Given)
    122
    Likes (Received)
    148

    Default

    Found the PS2 connector but now i get a disc error asking for a system disc. Unfortunately i don't have that disc. I'll have to do some chasing up.

  5. #5
    Join Date
    May 2009
    Location
    The Woodlands, Tx
    Posts
    581
    Post Thanks / Like
    Likes (Given)
    70
    Likes (Received)
    86

    Default

    the system disc it is looking for is the hard drive. have you checked to see if the cables came unplugged during shipment?

  6. #6
    Join Date
    Apr 2013
    Location
    South Australia
    Posts
    463
    Post Thanks / Like
    Likes (Given)
    122
    Likes (Received)
    148

    Default

    Quote Originally Posted by Justin_Terry View Post
    the system disc it is looking for is the hard drive. have you checked to see if the cables came unplugged during shipment?
    Yes i checked all that

  7. #7
    Join Date
    May 2009
    Location
    The Woodlands, Tx
    Posts
    581
    Post Thanks / Like
    Likes (Given)
    70
    Likes (Received)
    86

    Default

    possibly lost hd or control in the move. ive seen it happen more than once.

  8. #8
    Join Date
    Apr 2013
    Location
    South Australia
    Posts
    463
    Post Thanks / Like
    Likes (Given)
    122
    Likes (Received)
    148

    Default

    Not what i wanted to hear lol


Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •