What's new
What's new

G code or Mazatrol transfer Integrex 640MT Mazatrol

Atomwerk

Plastic
Joined
Jun 5, 2015
Location
Veneta. OR
I have been having issues using the Mazatrol M codes to get me a good transfer. I don't have any good examples of how to use the Mazatrol to do the transfer nor do I have any g code examples. Can someone provide me with either of these?

Charles.
 
#101=3.05(mat diameter)
#102=38.5(w=final transfer position)
#103=4.99(rapid amount in front of final transfer)
#104=1.63(part length)
#105=[#104+.18]
#106=[#102-#105]
#107=[[#102]-[#104]-[#103]]



n1015
t119119.1b001
g0g40(cut-off)
(transfer start)
g28u0.v0.
G53.5
g0z-.5

g110z2(control sub)
g0z-#107
m306 (sub unclamp)
m358 (sub air blow)
m511 (sync spindles)
g0z-[#102-#104] (sub safe approach)
g1 g98 z-[#102]f20. (sub to final z pos)
m307 (sub clamp)
g4p1000
m6 (main unclamp)
g1z-[#106] (sub pull bar out)
g4p0500
m7 (main clamp)
g111 (sub control cancel)
g53.5
g97m4s1000
m8

(cut off part)

g0x4.0
g110 z2
g28 z0. (home sub)
g111 (cancel sub control)
m5
m505
g0g28u0
g0z5.
M302
m154

/m99
m30
 
I have been having issues using the Mazatrol M codes to get me a good transfer. I don't have any good examples of how to use the Mazatrol to do the transfer nor do I have any g code examples. Can someone provide me with either of these?

Charles.

Is this a new machine....old machine but new to you....old machine but you are new to it????
Reason I ask is because when we purchased a new Integrex the machinery dealer we bought it from helped us write a transfer macro similat to what Chad shared in his reply.
If you can make them earn their money....do it.
 








 
Back
Top