thatonegii
Plastic
- Joined
- Nov 20, 2019
As title states I'm looking for help running a newer mazak with a fanuc 31i control in tape mode.
Control panel has a tape button and when I'm in tape mode I see no buttons or options that are familiar to either mazak or fanuc.
I tried running program as an external sub program off USB using m198 command but I get alarm sr1807. I've read conflicting information on whether this can be done or not with the newer fanuc controls.
We are currently having to split up large programs into as many as 20 separate programs and load them one at a time as we run them so any help would be immensely appreciated.
Control panel has a tape button and when I'm in tape mode I see no buttons or options that are familiar to either mazak or fanuc.
I tried running program as an external sub program off USB using m198 command but I get alarm sr1807. I've read conflicting information on whether this can be done or not with the newer fanuc controls.
We are currently having to split up large programs into as many as 20 separate programs and load them one at a time as we run them so any help would be immensely appreciated.