Hey,
When turn threading we remove the start/end of the thread by milling using manual program.
Program looks like this (for external thread using endmill at B90(non freedom units)):
Here, the last line just tells the tool to go up 20mm incremental in X. This is where I wonder if it would be possible to
change to a code which said return to X-home instead
Oh, using Mazatrol Matrix2
When turn threading we remove the start/end of the thread by milling using manual program.
Program looks like this (for external thread using endmill at B90(non freedom units)):
HTML:
G1 G2 Data1 Data2 Data3 Data4 Data5 Data6 S M/B
95 17 3183 M3
90 0 X 26.5 C 180 M51
Z 70
1 Z 66.1 F 0.3
91 X 3 C -360
Z 5 C -25
0 Z 20
Here, the last line just tells the tool to go up 20mm incremental in X. This is where I wonder if it would be possible to
change to a code which said return to X-home instead
Oh, using Mazatrol Matrix2