No one at my job can tell me how to teach a tool on the X-axis using the tool eye sensor?
It's a "live tool" 1/8-27 NPT carbide thread mill that is 13 degrees from center line of the bore on the O.D.
My company bought the "turn key" package from Mazak so Mazak taught the tool and wrote the program.
Any help would be great.....
It's a "live tool" 1/8-27 NPT carbide thread mill that is 13 degrees from center line of the bore on the O.D.
My company bought the "turn key" package from Mazak so Mazak taught the tool and wrote the program.
Any help would be great.....