clutch
Hot Rolled
- Joined
- Feb 12, 2006
- Location
- Northern LP of Michigan
I've spent way too much time on this machine but I learned a lot. It is an older multiplex with a M5xx control. After replacing the spindle drive I thought I was home free. Head one runs fine. Head two homes, jogs, spindle spins. You press cycle start with a part in the chuck, nothing happens. No alarms nothing. Acts like an angry wife. Yes the cycle start button is working along with the feed hold button on the panel.
Just before I left for the day I went to the PLC Signals screen and flipped from HD1 to HD2. SP is 1 or 0 depending on which head the switch is on. What is SP?
Thank you,
Clutch
Just before I left for the day I went to the PLC Signals screen and flipped from HD1 to HD2. SP is 1 or 0 depending on which head the switch is on. What is SP?
Thank you,
Clutch
Last edited:
