MAZAK VTC 800. Alarm 366 battery low atc arm. With new battery
Close
Login to Your Account
Likes Likes:  0
Results 1 to 1 of 1
  1. #1
    Join Date
    Sep 2018
    Country
    NORWAY
    Posts
    4
    Post Thanks / Like
    Likes (Given)
    0
    Likes (Received)
    0

    Default MAZAK VTC 800. Alarm 366 battery low atc arm. With new battery

    Hello all


    I have a MAZAK VTC 800 matrix2 Controller. Alarm 366 battery low atc arm sould be a easy fix. changed alot of em earlier but newer to not be able to Clear alarm With Power off/on

    Replaced the Mrj2 battery With a New, measured it to be 3,67V before swap. Turned off/on machine but the battery alarm is still there.
    When i open the mrj2 setup software and change the axis to ATC arm, it says low voltage 2.8v. I measured the "old" battery also to be 3,66V

    The plug is correctly plugged in

    I have also measured the other 2 and all batterys are good. But im quite sure im changing on the correct drive cause there is only one of them blinking AL

    Anyone experienced this or have any advice, would be much appreciated

    JarlEJensen


Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •