Hi all! I had an issue with a CNC Mazak Lathe, Slant Turn 50 to be precise, using Mazatrol 640t Controller. The battery died (Silver and black one behind the panel) and Some parameters was lost.
I recovered using the Maintenance tool inside the Mainte Folder, recovering the backup and flashing the SRAM, but the problem is at the parameters, I guess.
I have the parameter list, and I could change The User and Machine parameters, but I couldn't change the System, Servo and Spindle parameters, because a Mazak Technician told me they need to be modified in privilege mode, something he didn't want me to teach.
Now in data offset I have in X axis -****.**** but Z axis is OK, that gives me an alarm which is 121 Overtravel (+x, , ), and I don't know how to fix this. Any help would be appreciated! Thanks!.
I recovered using the Maintenance tool inside the Mainte Folder, recovering the backup and flashing the SRAM, but the problem is at the parameters, I guess.
I have the parameter list, and I could change The User and Machine parameters, but I couldn't change the System, Servo and Spindle parameters, because a Mazak Technician told me they need to be modified in privilege mode, something he didn't want me to teach.
Now in data offset I have in X axis -****.**** but Z axis is OK, that gives me an alarm which is 121 Overtravel (+x, , ), and I don't know how to fix this. Any help would be appreciated! Thanks!.