Selvidge209
Plastic
- Joined
- Aug 27, 2021
I am new to programming on the Mazatrol control and I am seriously fighting trying to program a simple arc move.
Any tips or help?
Any tips or help?
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Largest Manufacturing Technology Community on the Web
Stay Connected:
Mazatrol help!!!
- Thread starter Selvidge209
- Start date
- Replies 6
- Views 2,515
TeachMePlease
Diamond
- Joined
- Feb 11, 2014
- Location
- FL
It would help a lot if you told us the machine and control...
Scruffy887
Titanium
- Joined
- Dec 17, 2012
- Location
- Se Ma USA
LINE or ARC (LEFT, RIGHT, OR CENTER) Give it the starting point and that line will be blue. Give end point. If an arc then at min Radius is needed. You may or may not need the arc center, control can guess sometimes if you hit ? key. But giving it the center helps a lot.
I just did a program with a lot of connected arcs. Smooth G control but sorta same in Fusion.
I just did a program with a lot of connected arcs. Smooth G control but sorta same in Fusion.
Selvidge209
Plastic
- Joined
- Aug 27, 2021
Mazak Nexus 510C-II
Mazatrol Matrix Nexus control
Mazatrol Matrix Nexus control
metalmadness
Hot Rolled
- Joined
- Nov 25, 2015
I would recommend consulting the Mazatrol programming manual. It should cover this topic in great detail. If you don't have access to it in the hsop you may be able to find it online
Gobo
Titanium
- Joined
- Jun 4, 2013
- Location
- Oregon, USA
Lathe right? show us what you want to do
Red James
Stainless
- Joined
- Jan 26, 2013
- Location
- Plainfield, Indiana, USA
The first 'point' in the figure is ALWAYS "LINE"; in your case, the "LINE" is the start point of your arc. The next line in your figure is CW or CCW arc, and enter the X, Y endpoint of the arc. I and J are the absolute co-ordinates of the center. MAZATROL CONFUSION: When you program in a manual unit, the center coordinates are INCREMENTAL.
Similar threads
