Hello all,
i have problem with my Mazak SQT18M
Z axis moving in wrong scale, movement is about 1.2 times more than programmed.
If i program Z axis to move 10mm then real movement of axis is 12mm
probally is wrong parameter value, but i could not find it.
I have all parameters in manuals, except S parameters
Does anybody have S parameters list?
Thank you,
Tibor
i have problem with my Mazak SQT18M
Z axis moving in wrong scale, movement is about 1.2 times more than programmed.
If i program Z axis to move 10mm then real movement of axis is 12mm
probally is wrong parameter value, but i could not find it.
I have all parameters in manuals, except S parameters
Does anybody have S parameters list?
Thank you,
Tibor
