Silvano
Plastic
- Joined
- Aug 1, 2014
- Location
- Chile, Santiago
Hi there,
I bought a Multiplex 610. I got the machine with problems in the floppy diskk drive. I can not load the parameters, so I entered by hands. I had a list of them in a Manual, but I Am not sure that they are the proper ones.
I can not get the part catcher working. If I put the parameter R60 = 10001000. This suppose to have the part catcher activated, but the head number 2 does not move with this parameter in this setting.
If I put the parameter R60= 10000000 the head number 2 moves without problem but the part catcher does not work because is unable.
I think that the problem is in the parameters. I need to set them properly in order to work with the machine with the part catcher and the bar feeder.
I bought a Multiplex 610. I got the machine with problems in the floppy diskk drive. I can not load the parameters, so I entered by hands. I had a list of them in a Manual, but I Am not sure that they are the proper ones.
I can not get the part catcher working. If I put the parameter R60 = 10001000. This suppose to have the part catcher activated, but the head number 2 does not move with this parameter in this setting.
If I put the parameter R60= 10000000 the head number 2 moves without problem but the part catcher does not work because is unable.
I think that the problem is in the parameters. I need to set them properly in order to work with the machine with the part catcher and the bar feeder.
