benganboll
Hot Rolled
- Joined
- Feb 23, 2015
- Location
- Sweden Östersund
I have a Multiplex 620 with T32 and the C axis is kind of jumpy if I use the brake.
If I write text with it whithout the brake it works perfect but if I apply the brake it becomes jumpy and breakes my tools.
I have checked the pressure and it is around 7,5bar as it should be.
I have the same problem on booth sides.
Maybe I need new brake pads? (I have not checked)
If I write text with it whithout the brake it works perfect but if I apply the brake it becomes jumpy and breakes my tools.
I have checked the pressure and it is around 7,5bar as it should be.
I have the same problem on booth sides.
Maybe I need new brake pads? (I have not checked)
