Jgryz450
Cast Iron
- Joined
- Mar 4, 2017
- Location
- Emmaus pa,USA
so I went to fire up the machine after sitting for months and I wound up with a forien alarm along with spindle controller malf. I opened up the cabinet and didn't see any lights on the spindle drive? I seen that the 1 breaker/relay thing had its button not pulled in,,,(sorry,,i forgot what its called,there are 4 of em by the drive),so I pushed it in to see if its what powers the drive but nothing happened. I had to reload the parameters since it sat so long,,double checked my work,,all seemed good,,still had the alarm...when I bought the machine the drive was sent out to mits and they charged 800 to fix the power supply for the drive so I would hope it would last more then 2years... the machine comes to life,,homes out fine,,,shes a lil P.O'D from sitting so long. I wanted to start attacking the issue with my multi meter butt the 1 yr old demanded all my attention at home so I have no idea whats going on with 'er. did any of yous have similer issues with the older mits drives? any ideas were to start? everthing was fine the last time I used it. I guess its true that these machines want to be used and not sit considering the more it was used the better it worked? im open to all ides,,i have pics of the relay board and whats lit up as well. at first I though I entered the wronge parameter somwere but I couldn't find one unless I missed it? any ideas will be greatly appreciated!! thanks