Probe problem on H 400
Login to Your Account
Likes Likes:  0
Results 1 to 1 of 1
  1. #1
    Join Date
    Apr 2013
    South Australia
    Post Thanks / Like
    Likes (Given)
    Likes (Received)

    Default Probe problem on H 400

    G'day all, trying to get the probe working on my H400. It had a probe setup already but the induction module had been crashed into prior to me buying the machine so I've never had a probe working on this machine. I managed to get another module on flea bay and went about fitting it up and adapted my MP3 probe off the other cat 50 mill to a BT40. All done. When I entered the probe in the tool data all I get is a 230 alarm illegal mms. I have disconnected the new to me module but still the same error until I actually delete the probe from the tool data. I did hook the module back up after deleting the mms from tool data and that is no problems or errors until I put it back in the data. I have checked the parameters associated with the probe that I could find but they are speed and skip signal. The only other one is one of the R parameters but that is also correct. Any ideas?? It's not a do or die situation but would be handy to have working. Thanks

Tags for this Thread


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts