cleroux
Plastic
- Joined
- May 23, 2013
- Location
- Perrysburg, OH
Hoping you brilliant minds can help me, yet again, with a threading issue. The finish product is an auger, so it's super deep with a high pitch. The problem I'm having is that the wall seems to be "trailing" away from the spindle.
Take a look:
Here's the beginning of a part that I scrapped using the same settings (but a wider tool tip):
Can anyone explain why things seem to have magically changed? I'm at a total loss and Mazatrol is, as usual, not helping. Thank you!!
EDIT: PROGRAM PARAMETERS:
[tr]
[td]PNo.[/td]
[td]MODE[/td]
[td]#[/td]
[td]CHAMF[/td]
[td]LEAD[/td]
[td]ANG[/td]
[td]MULTI[/td]
[td]HGT[/td]
[td]NUMBER[/td]
[td]V[/td]
[td]DEPTH[/td]
[td]TOOL[/td]
[/tr] [tr]
[td]SEQ[/td]
[td][/td]
[td][/td]
[td][/td]
[td]SPT-X[/td]
[td][/td]
[td]SPT-Z[/td]
[td][/td]
[td]FPT-X[/td]
[td][/td]
[td]FPT-Z[/td]
[td][/td]
[/tr]
Take a look:
Here's the beginning of a part that I scrapped using the same settings (but a wider tool tip):
Can anyone explain why things seem to have magically changed? I'm at a total loss and Mazatrol is, as usual, not helping. Thank you!!
EDIT: PROGRAM PARAMETERS:
2 | THR OUT | [1] | 0 | 0.79 | 89 | 1 | 0.55 | ◆ | 65 | 0.005 | 11 |
1 | 1.89 | 0. | 1.89 | 13.25 |
[td]PNo.[/td]
[td]MODE[/td]
[td]#[/td]
[td]CHAMF[/td]
[td]LEAD[/td]
[td]ANG[/td]
[td]MULTI[/td]
[td]HGT[/td]
[td]NUMBER[/td]
[td]V[/td]
[td]DEPTH[/td]
[td]TOOL[/td]
[/tr] [tr]
[td]SEQ[/td]
[td][/td]
[td][/td]
[td][/td]
[td]SPT-X[/td]
[td][/td]
[td]SPT-Z[/td]
[td][/td]
[td]FPT-X[/td]
[td][/td]
[td]FPT-Z[/td]
[td][/td]
[/tr]
Last edited: