72bwhite
Titanium
- Joined
- Sep 26, 2012
- Location
- California, Ventura county
Simple question are there any surprises to
removing the end cover on a QT10 turret
I'm replacing the way cover wipers and such
problem is the PO ran a bunch of stainless with the
chips caught between the wiper and actually wore a large dip in the
surface.
bad enough that it probably wont seal very well.
there appears to be 7 bolts holding the thing on.
is it any more complicated then remove the bolts and pull it off,
and the reverse to re install it?
see photo for more clarity that's the part I'm referring to
removing the end cover on a QT10 turret
I'm replacing the way cover wipers and such
problem is the PO ran a bunch of stainless with the
chips caught between the wiper and actually wore a large dip in the
surface.
bad enough that it probably wont seal very well.
there appears to be 7 bolts holding the thing on.
is it any more complicated then remove the bolts and pull it off,
and the reverse to re install it?
see photo for more clarity that's the part I'm referring to