Hello.
We have an sqt200 lathe with mazatrol fusion 640t control. During the spindle repairing, the battery was gone. We have managed to bring back the nc side, but as I found out there was no backups of tool data and tool offsets. folder t_backup\other is empty and no files like toldat01 on hdd. also no files on cards and disks.
So, the machine seem to be working, no errors. Except tooleye not working and emty tools tables. work offsets and jaws tables are empty also.
If I will take these files from the other machine (with fusion 640t) and put it in \t_backup\other and upload using data i/o. will it work?
Will be very appriciate for any help.
We have an sqt200 lathe with mazatrol fusion 640t control. During the spindle repairing, the battery was gone. We have managed to bring back the nc side, but as I found out there was no backups of tool data and tool offsets. folder t_backup\other is empty and no files like toldat01 on hdd. also no files on cards and disks.
So, the machine seem to be working, no errors. Except tooleye not working and emty tools tables. work offsets and jaws tables are empty also.
If I will take these files from the other machine (with fusion 640t) and put it in \t_backup\other and upload using data i/o. will it work?
Will be very appriciate for any help.