Midnight Machinist
Aluminum
- Joined
- Nov 2, 2006
- Location
- Seattle
Hello folks,
I've got a new (to me) 1989 QT 15 with a T2-CAM control. The parameters were scrambled when I got it, but still it made hydraulic pressure, fans, and the control fired up.
With a trusty copy of a copy of a copy of a parameter list in hand I wiped the memory and re-installed the parameters given to me with the machine.
Now I don't get hydraulics, and only get fans and the control fires up with no motion. It shows and illegal pocket number alarm, so the Parameters must not be correct? They are not available from Mazak for this machine, either; I already asked.
What I'd really like is someone with the same machine (1989 qt 15 with ac servos, 3600rpm, 8 position turret) to send me the parameter list they are using in their machine, if possible.
Pictures of the parameter screens (including those in privileged mode), or emailed lists, or whatever. Any help will be awesome, as I'm out of ideas.
If I could find who to pay to get the damn thing correct, I'd happily do it, but most folks say that without a good parameter list there's nothing they can do.
If you'd rather call, you can reach me at (206)972-4622.
Thanks,
Grant
I've got a new (to me) 1989 QT 15 with a T2-CAM control. The parameters were scrambled when I got it, but still it made hydraulic pressure, fans, and the control fired up.
With a trusty copy of a copy of a copy of a parameter list in hand I wiped the memory and re-installed the parameters given to me with the machine.
Now I don't get hydraulics, and only get fans and the control fires up with no motion. It shows and illegal pocket number alarm, so the Parameters must not be correct? They are not available from Mazak for this machine, either; I already asked.
What I'd really like is someone with the same machine (1989 qt 15 with ac servos, 3600rpm, 8 position turret) to send me the parameter list they are using in their machine, if possible.
Pictures of the parameter screens (including those in privileged mode), or emailed lists, or whatever. Any help will be awesome, as I'm out of ideas.
If I could find who to pay to get the damn thing correct, I'd happily do it, but most folks say that without a good parameter list there's nothing they can do.
If you'd rather call, you can reach me at (206)972-4622.
Thanks,
Grant