Tap_or_Die
Cast Iron
- Joined
- Apr 4, 2014
- Location
- Oklahoma, USA
Hello everyone,
I have a small issue on our mill. When trying to jog the tool down to the table I get an alarm "1101, interference "too1 #1", interference "table". This happens around 2 inches above the table. This is a used machine and I can only assume that the previous owner had this in place to keep from crashing the machine. I would like to know how to remove, or shorten the barrier
I have a small issue on our mill. When trying to jog the tool down to the table I get an alarm "1101, interference "too1 #1", interference "table". This happens around 2 inches above the table. This is a used machine and I can only assume that the previous owner had this in place to keep from crashing the machine. I would like to know how to remove, or shorten the barrier