Kentuckydiesel
Aluminum
- Joined
- Feb 4, 2011
- Location
- Kentucky, USA
We are fairly new to lasers and have a 2500w Mazak X612 that has been down for a while. It will travel to the start of the cut, the head will drop to the correct height off the material, but it won't fire. The technicians that have been out to look at are down to having us pull boards one by one to be tested. So far, all are coming back good. Wondering if anyone could help us with any common problems or a step by step checklist as we haven't been able to get much information from anyone else.
Thanks,
Phillip
Thanks,
Phillip
