Yukon Eric
Plastic
- Joined
- Dec 6, 2019
We have a mazak super quick turn 250 with live tooling. We have a new part that gets a 5/8 x 1.00 long bronze bushing pressed in it.
I would like to bore the hole to size with .0005 press fit, m00 the program have the operator slide the bushing onto a mandrel, then press the start button and have the machine press the bushing into the part. Then finish bore the hole to size.
Are the servos strong enough to push the bushing in?
I would like to bore the hole to size with .0005 press fit, m00 the program have the operator slide the bushing onto a mandrel, then press the start button and have the machine press the bushing into the part. Then finish bore the hole to size.
Are the servos strong enough to push the bushing in?