Hi Everyone,
I'm looking for suggestions on how to measure the true position of a cross-hole on a cylindrical part?
Pictured below there is a 0.275" +/- 0.0003" Dia. cross hole that needs to be centered in the tube O.D. within .0005"
Any ideas? Thanks!
Tube OD: 0.875" +/- 0.001"
Tube ID: 0.625" +/- 0.001"
Overall length: 1.0000" +/- 0.0002" < yep 4 decimal places
Large cross hole: 0.400" Dia. +/- 0.002"
Small cross hole: 0.275" Dia. +/- 0.0003"
Material: 4140 at 38-44Rc
Quantity: 1000pcs.
I'm looking for suggestions on how to measure the true position of a cross-hole on a cylindrical part?
Pictured below there is a 0.275" +/- 0.0003" Dia. cross hole that needs to be centered in the tube O.D. within .0005"
Any ideas? Thanks!
Tube OD: 0.875" +/- 0.001"
Tube ID: 0.625" +/- 0.001"
Overall length: 1.0000" +/- 0.0002" < yep 4 decimal places
Large cross hole: 0.400" Dia. +/- 0.002"
Small cross hole: 0.275" Dia. +/- 0.0003"
Material: 4140 at 38-44Rc
Quantity: 1000pcs.
Last edited: