Measuring Total Face Runout
Close
Login to Your Account
Results 1 to 2 of 2
  1. #1
    Join Date
    Oct 2017
    Country
    UNITED STATES
    State/Province
    Kansas
    Posts
    1
    Post Thanks / Like
    Likes (Given)
    1
    Likes (Received)
    0

    Default Measuring Total Face Runout

    I'm new to this and could use some help.
    I need to measure the runout on the face of this item.
    My understanding is that the part should rotate around Datum B axis, and the height gage/indicator measures the runout on the face perpendicular to B?



    2020-05-22.jpg

  2. #2
    Join Date
    Jun 2014
    Country
    UNITED STATES
    State/Province
    Wisconsin
    Posts
    23
    Post Thanks / Like
    Likes (Given)
    45
    Likes (Received)
    17

    Default

    Quote Originally Posted by krk2573 View Post
    I'm new to this and could use some help.
    I need to measure the runout on the face of this item.
    My understanding is that the part should rotate around Datum B axis, and the height gage/indicator measures the runout on the face perpendicular to B?



    2020-05-22.jpg
    The callout refers to the pitch diameter of the thread, so if you can, mount the part on a thread gage on a bench center. If you cannot mount the thread gage then an expanding mandrel may do the trick. and yes, the indicator tip is in contact with the face.

  3. Likes krk2573 liked this post

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •