snocat_trf
Hot Rolled
- Joined
- Oct 22, 2002
- Location
- Canton, South Dakota
I have a measurment I need to make and we need to use the data for SPC. the Mic I had in mind was a Mitutoyo 345-351, I called and even asked the Tech support guy at Mitutoyo if this would work for my application, He told me that it had 2.5mm round anvils just like the 345-350 which is the 0-1" of the same style. The Mitutoyo information page on their website also shows a round anvil.
I ordered it and it came in, well it was not what I expected. It had caliper style anvils with a radius on them, but the radius is not small enough even if I grind a chamfer on the sides of the anvils, it will not measure the slot in the part I need to measure.
I am trying to check a slot that is 47.10mm long and 3.5mm wide with a 1.75mm radius on the ends.
If anyone knows of a mic or off the shelf gauge that will work for this that has spc capability, Please let me know.
TIA
Snocat_trf
I ordered it and it came in, well it was not what I expected. It had caliper style anvils with a radius on them, but the radius is not small enough even if I grind a chamfer on the sides of the anvils, it will not measure the slot in the part I need to measure.
I am trying to check a slot that is 47.10mm long and 3.5mm wide with a 1.75mm radius on the ends.
If anyone knows of a mic or off the shelf gauge that will work for this that has spc capability, Please let me know.
TIA
Snocat_trf