What's new
What's new

10EE Carriage Bearings

Will McRay

Aluminum
Joined
Dec 31, 2017
Does anyone have any recommendations on where to find bearings for the carriage and what part number is the preferred?

Will


Sent from my iPhone using Tapatalk
 
I was looking for the carriage bearings, not the apron bearings but thanks because I am assess those too.

Will


Sent from my iPhone using Tapatalk
 
Does anyone have any recommendations on where to find bearings for the carriage and what part number is the preferred

I'm pretty sure that it's a 608, so a 608-2RS would be preferred (or a 608ZZ, they're kind of protected so a shield should be ok).

Easy way to check would be to drop one of the read gib blocks and check the bearing.
 
I got hold-down bearings as well as taper-attachment bearings for my round-dial from VXB. You can measure what you have and search on VXB's site by ID, OD and thickness.

Cal
 
I disassembled and measured the bearings. searched the web and VXB turned out to be the best place to purchase from. These are 629ZZ bearings.

Thanks Everyone for your help.

Will


Sent from my iPhone using Tapatalk
 








 
Back
Top