Module drive 10ee schematic

I have been trying to understand the wiring of my 1961 10ee module drive lathe.
The circuits seem to be numbered but finding the corresponfing numbers is difficult.
I tried to OCR (Optical Character Recognize) the schematics so that I could search
them but the coppies are too poor for that to work.

I have entered one schematic in KiCAD. KiCAD is a free and open source design
program for circuit boards. This schematic is my first effort and I am posting
it here. If anyone wants to make suggestions for improvements that would be
a big help. What I really want is to know what is the function of each numbered
circuit. I would like to make a table with the number and the corresponding
function.

This is the drawing that I started with:

This is my effort so far:

Nice work!

Here are a few comments:

• You should include the sheet number that this is based upon, i.e. 23112, since there are other versions of this sheet (for example 29912 and 25661).
• I would also include the fact that it's for a Modular Drive, as that might not be obvious to the user and this would not be helpful to a Works in a Drawer drive owner.
• You've omitted the overload relay from the hydraulic pump section. Somewhere on one of the other sheets (possibly one that you don't have) there is a contact labeled "OL4" that controls something.
• The three switches in the operator's control station are: SS1, PB1 and PB2

Cal

Thanks for the feedback. I will make updates and repost it.
It does say "Module drive" in the title block!

At first I tried to do the attachment as a PDF file but could not as it was too big.
Attaching a large JPG file is OK. A PDF file would allow for text search but a JPG
does not. That is the whole purpose of my efforts. Is there any solution?

Here is my latest effort:

I have copied some of the data from the blueprints glued to the inside of the
doors on my 1961 module drive 10ee.

This is the section called "electrical parts list":



This is the section called "nomenclature":


This is a picture of the schematic (edited and color flipped):


I found that the pictures that I took were hard to read but
the original blueprints were not too bad so I entered the data
by hand for my own reference. If anyone wants the original PDF's
or the editable text files, let me know.