In matter best not discussed in detail the base casting got pretty badly damaged. I started putting it back together with nickel rod and that will work but it's a lot of hours and expensive rod. I suspect there must be lots of machine parts around and base castings aren't a thing that usually fails so thought I'd put it out there that I'm in California and looking for one.
The other matter is that something in my 10EE electronics died, cooking several wires and blowing up my FF relay. Last I checked they were pretty much pure unobtanium but I thought I'd see what the current thinking on the matter was.
Since I now have another 10EE I'm not opposed to doing a servo drive changeover if I just can fix this one, but I'd rather keep it original if I can.
Thanks all,
The other matter is that something in my 10EE electronics died, cooking several wires and blowing up my FF relay. Last I checked they were pretty much pure unobtanium but I thought I'd see what the current thinking on the matter was.
Since I now have another 10EE I'm not opposed to doing a servo drive changeover if I just can fix this one, but I'd rather keep it original if I can.
Thanks all,