10ee -I need the thread chasing stop screw and disc it engages

[lectrician1]

10 ee MG missing the thread chasing stop screw and the disc that it engages located behind the cross slide hand wheel dial.

Anyone have one to sell?

PM me the details

Thanks

Rich

 

[rimcanyon]

10 ee MG missing the thread chasing stop screw and the disc that it engages located behind the cross slide hand wheel dial.

Anyone have one to sell?

PM me the details

Thanks

Rich

“Disc that it Engages”??

The internal parts of the thread chasing stop are three rings and a pin. The reason there are three rings is that you get almost three revolutions of the hand wheel between stops (the screw is one stop, the pin the other). There is also a setscrew involved (it stops the thread chasing screw from backing completely out.

Send me a PM if you need all those parts. I don’t have the pin, but it is seldom missing.

Dave

 

[whateg0]

Mine doesn't have a set screw to retain the stop screw. It has a dowel pin driven all the way through the body.

Dave

 

[lectrician1]

i got the parts today
thanks Dave
haven't fit them yet]
i will report back after install