johnoder
Diamond
- Joined
- Jul 16, 2004
- Location
- Houston, TX USA
Here is how the stud gears changed for various mm. If I recall correctly, Monarch was using a 63 / 80 compound. The 2 1/2 - 80 is the third from right column on the QC gearbox chart - at least on the 14 and 16" lathes
Maybe more readable
On Edit .... if there was a little less paint on that chart, we could see the gear layout diagram at the bottom
Maybe more readable
On Edit .... if there was a little less paint on that chart, we could see the gear layout diagram at the bottom
Last edited: