What's new
What's new

1954 Monarch 25" swing help id model?

Here's most of the data plate. Pages 22-23 on the pdf?

file:///C:/Users/sairc/Downloads/17199%20(1).pdf

I found the pdf from Vintage Machinery, the "NN" is the 30" lathe.

209762570_967364220725125_6259373928704556856_n.jpg
 
There were M, N and NN

I'd guess "too new" to stick to old designations, but My guess is that it is based on the N - which was commonly offered in the 27" size

The big ones go back at least to 1934 in that general appearance

Like can be seen on VM

Here is a NN 30" that actually swung 34 - it failed to sell in East Houston over a year back

00C0C_lcfRcrwUg0Y_1200x900.jpg00e0e_jfteBkFnNmm_1200x900.jpg00f0f_3Ntdz6xuXGs_1200x900.jpg00S0S_cFMP1Ub3ytY_1200x900.jpg00202_8KntyAPNPPX_1200x900.jpg

That mounted four jaw is 28"
 
Last edited:
you have to look at the serial down at the very end of the machine om top of the ways. either going to be nn or possibly NI, followed by the actual ser. number . I have a 20'long NI.
 








 
Back
Top