Hi all. I have a 1949 cva mk1. It's a direct copy of a round dial 10ee, except for the motor and drive arrangement. The lathe was bought part restored and is not nearly complete, but running it showed that in screwcutting drive the headstock clunked.
Further investigation has shown the revrrse idler is missing teeth.
Does anyone have one or have any ideas what to do?
My guessing is the original will be hardened and profile ground.
I could maybe make one, but it'd never be as good as an original.
This lathe is otherwise perfect and complete.
Thanks.
Ian
Further investigation has shown the revrrse idler is missing teeth.
Does anyone have one or have any ideas what to do?
My guessing is the original will be hardened and profile ground.
I could maybe make one, but it'd never be as good as an original.
This lathe is otherwise perfect and complete.
Thanks.
Ian