rimcanyon
Diamond
- Joined
- Sep 28, 2002
- Location
- Salinas, CA USA
I need a couple parts for the 49 square dial I am restoring. Can trade 10EE parts or purchase, your choice. Here are some pictures to show what I am missing:
1. Left, Feed, Right dial. Similar to the picture below, but this one is from a round dial and it is bronze. Looking for an aluminum dial for square dial machine.
2. One or two deco bars for the front cover. Ideally I need the two narrow bars that go on the sides, but if I get one bar, wide or narrow, that will work. The bar on the cover below the start switch is the same size.
1. Left, Feed, Right dial. Similar to the picture below, but this one is from a round dial and it is bronze. Looking for an aluminum dial for square dial machine.
2. One or two deco bars for the front cover. Ideally I need the two narrow bars that go on the sides, but if I get one bar, wide or narrow, that will work. The bar on the cover below the start switch is the same size.