daryl bane
Titanium
- Joined
- Mar 12, 2002
- Location
- East Texas
This is for forum member Crazypete who I bought it from. I had been looking for one for many years and he mentioned in a post that this one was surplus to his needs and I pounced. It was in great shape, complete, save for a few dents and many coats of oil based enamel of various colors including the infamous "baby blue". Of course I neglected to take a before pic. Did the full strip, then complete auto body procedure, with a finish coat of PPG Deltron which was leftover from the Monarch restoration, old, but still shot great. I welded up a angle iron rolling base, replaced the hardware, the original top was covered with 1/4 mason board , which looked to be original, but I replaced it with 1/8"mason board and then glued 1/8" Mass loaded vinyl over that. I had a roll left over , and found it makes great shelf liner. expensive, but tough.
Last edited by a moderator: