jefferts
Aluminum
- Joined
- Sep 19, 2006
- Location
- Boulder, CO
Stupid question here - where (physically) are the caps and the rectifier associated with the QSD relay located ??
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Largest Manufacturing Technology Community on the Web
Stay Connected:
QSD Relay Rectifier
- Thread starter jefferts
- Start date
- Replies 2
- Views 1,263
rke[pler
Diamond
- Joined
- Feb 19, 2002
- Location
- Peralta, NM USA
Must be a novice license and code only.
As to the original question - I have 2 schematic versions of the QSD, one with a bridge rectifier and a couple of caps (C8 & C9) across the armature windings feeding the coil (looking at back EMF, maybe?) and others with nothing but the coil inline with the series field winding (and thus the armature) likely in some current sensing configuration.
If I were you I'd find lines 51 & 49 on the module and trace them out there as they're the QSD coil in the one schematic I have that shows them.
jefferts
Aluminum
- Joined
- Sep 19, 2006
- Location
- Boulder, CO
Ouch ... ok I walked into that one .... in my defense I haven't used my license in about 30 years, but still. OK, I looked, the schematic in my manual is the one with the bridge and capacitors (neither of which are anywhere to be found). The label on the inside of the door just has the coil wired in.
In any case, thanks for the help and the laugh !!
In any case, thanks for the help and the laugh !!
Similar threads
