bloomautomatic
Cast Iron
- Joined
- Oct 17, 2012
- Location
- Pennsylvania
I need to take the carriage off our Monarch 24N. It looks like it bolts down to the apron on the underside.
My only other experience with removing a carriage is on a South Bend 10". This is a tad bit bigger. I'm guessing I need to support the apron when I break the bolts loose? Is there anything else I'm missing for fasteners? Any other advice is appreciated.
I have this manual for it, but it doesnt give a great assembly view.
http://manuals.chudov.com/Monarch/Monarch-SS-BB-C-CK-CU-CY-EE-K-M-N-NN-W-Lathes.pdf
Thanks
My only other experience with removing a carriage is on a South Bend 10". This is a tad bit bigger. I'm guessing I need to support the apron when I break the bolts loose? Is there anything else I'm missing for fasteners? Any other advice is appreciated.
I have this manual for it, but it doesnt give a great assembly view.
http://manuals.chudov.com/Monarch/Monarch-SS-BB-C-CK-CU-CY-EE-K-M-N-NN-W-Lathes.pdf
Thanks