Crazymonkey
Plastic
- Joined
- Nov 19, 2014
- Location
- Texas
Hey guys, i'm having issues with my round dial backgear leaking oil from behind the drive pulley. It doesn't leak immediately, but after a couple minutes of running, it starts slinging a decent amount of oil everywhere. I recently rebuilt the backgear and made an adapter plate to a marathon blackmax.
One thing i noticed that doesn't seem right, is the 13 thou of axial movement in the drive pulley with all the bolts tight. Is this normal?
The only other thing i can think of, is maybe i missed a gasket somewhere? I have one on the end of the pulley, and one that seals the bearing retaining plate (with the drain back hole).
Any ideas or comments would be appreciated. Thanks
One thing i noticed that doesn't seem right, is the 13 thou of axial movement in the drive pulley with all the bolts tight. Is this normal?
The only other thing i can think of, is maybe i missed a gasket somewhere? I have one on the end of the pulley, and one that seals the bearing retaining plate (with the drain back hole).
Any ideas or comments would be appreciated. Thanks