jlratti
Plastic
- Joined
- Jul 29, 2013
- Location
- Monroe, NY
Hello!
I just got my hands on a nice working MG powered 10EE.
It works just fine now, but I am considering hook up options from 240 single phase.
Of course a Rotary Phase Converter will work just fine.
My question is can I just power this machine with a VFD set to 60 hz?
I am thinking this route because if further down the road the MG unit or Spindle Motor fails, I can just use the VFD I already have to do a conversion to a 5 hp 3 phase spindle motor + the VFD I already have.
Thanks for your help!
-JR
I just got my hands on a nice working MG powered 10EE.
It works just fine now, but I am considering hook up options from 240 single phase.
Of course a Rotary Phase Converter will work just fine.
My question is can I just power this machine with a VFD set to 60 hz?
I am thinking this route because if further down the road the MG unit or Spindle Motor fails, I can just use the VFD I already have to do a conversion to a 5 hp 3 phase spindle motor + the VFD I already have.
Thanks for your help!
-JR