Brandenberger
Hot Rolled
- Joined
- Sep 19, 2017
Hi,
I have a 10ee currently in a garage without 3phase or even 240v single phase.
However I do have some 120-to-240 transformers (500VA rated).
Of course this isn't anywhere enough to really run a 10ee at high speed or do anything
that draws real current. But is it enough to get the spindle running and check
basic electrical functions?
The machine was running when I picked it up, so I'm not too concerned about it.
There are also some 10ee's around from time to time that the seller says "I have no way to power this" and it would be nice to have a kit to take along to run the thing.
-Phil
I have a 10ee currently in a garage without 3phase or even 240v single phase.
However I do have some 120-to-240 transformers (500VA rated).
Of course this isn't anywhere enough to really run a 10ee at high speed or do anything
that draws real current. But is it enough to get the spindle running and check
basic electrical functions?
The machine was running when I picked it up, so I'm not too concerned about it.
There are also some 10ee's around from time to time that the seller says "I have no way to power this" and it would be nice to have a kit to take along to run the thing.
-Phil