morsetaper2
Diamond
- Joined
- Jul 2, 2002
- Location
- Gaithersburg, MD USA
I had a 10EE quite a few years ago that I sold off. It needed work and I just don't have the space to spread things out to work on it. I kept all the tooling for it in the hope at some point in the future I might move into a much bigger shop space. Which I expect will happen in the next few years. And then might take on that sort of project. Anyway, I know a little bit about 10EE's.
I bought a "box lot" of step chucks for what I thought were all South Bend Step chucks, for my Heavy-10 South Bend lathe. In going through them, I found this one step chuck slightly different than the SB step chucks.
Is it serialized to a 10EE? S/N seems to need one more numerical digit to be for a 10EE. Step chuck is 6.5 inch on max OD.
...
10EE's didn't go into production until late 1930's, so 4 digit 2061 S/N doesn't seem to fit EE. needs an addtl digit.
Serials from S/N Reference book....
I bought a "box lot" of step chucks for what I thought were all South Bend Step chucks, for my Heavy-10 South Bend lathe. In going through them, I found this one step chuck slightly different than the SB step chucks.
Is it serialized to a 10EE? S/N seems to need one more numerical digit to be for a 10EE. Step chuck is 6.5 inch on max OD.
...
10EE's didn't go into production until late 1930's, so 4 digit 2061 S/N doesn't seem to fit EE. needs an addtl digit.
Serials from S/N Reference book....