tailstock "stack up" what am I missing?
Close
Login to Your Account
Likes Likes:  0
Results 1 to 2 of 2
  1. #1
    Join Date
    Apr 2011
    Country
    UNITED STATES
    State/Province
    Wisconsin
    Posts
    303
    Post Thanks / Like
    Likes (Given)
    102
    Likes (Received)
    70

    Default tailstock "stack up" what am I missing?

    So as found my 10ee had a loose TS handwheel.

    Disassembled and cleaned up and I see I am missing about 3/8" of "take up"

    It seems to have a wonky thrust bearing. One of the races has a groove in it and the other is flat on both sides. Has the hub of the handwheel been cut down? Is the current thrust bearing MUCH shorter than the OEM? I can machine a spacer to takeup the missing gap, but looking at the monarch drawings all my pieces are there, but my existing pieces just dont "stack up"

    img_20180409_191939517.jpg

    img_20180409_191945370.jpg

    img_20180409_192201541.jpg

  2. #2
    Join Date
    Mar 2016
    Country
    UNITED STATES
    State/Province
    Louisiana
    Posts
    356
    Post Thanks / Like
    Likes (Given)
    191
    Likes (Received)
    66

    Default

    Here is a picture of mine and yes you are missing a piece in between20180410_032813.jpg the hand wheel and the dial.


Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •