My new to me 10EE came completely gutted of all the drive control. I think it was converted from the previous WIAD to a different system in the past. Most of the wiring was in a two inch conduit that must have ran to a external control box. Given the lathes current condition I have opted to install a VFD with an AC motor.
My intent is to control the spindle direction with the ELSR and the speed with the control knob. I've reviewed several of the previous threads and I've adapted DaveE907's matrix to include the spindle and saddle direction.
Please let me know if something is wrong.
Once I solve the direction part, I would like to integrate the spindle lock switch into the system; perhaps using the 3rd switch. My schematic calls out a safety switch, but I'm unsure of the function and how it's wired. The VFD is design to stop if it gets conflicting signals, so that might help in the integration.
My intent is to control the spindle direction with the ELSR and the speed with the control knob. I've reviewed several of the previous threads and I've adapted DaveE907's matrix to include the spindle and saddle direction.
Please let me know if something is wrong.
Once I solve the direction part, I would like to integrate the spindle lock switch into the system; perhaps using the 3rd switch. My schematic calls out a safety switch, but I'm unsure of the function and how it's wired. The VFD is design to stop if it gets conflicting signals, so that might help in the integration.