LU35II with OSP P300 Control- Start Up Help
Close
Login to Your Account
Likes Likes:  0
Results 1 to 2 of 2
  1. #1
    Join Date
    Apr 2021
    Country
    UNITED STATES
    State/Province
    Texas
    Posts
    1
    Post Thanks / Like
    Likes (Given)
    0
    Likes (Received)
    0

    Post LU35II with OSP P300 Control- Start Up Help

    I am starting up an LU35II with an OSP P300 control and am just wanting to write a start-up program to move the spindle and turrets around without setting tool coordinates or tools. I have no manuals and I can move the turrets in jog mode, but, not through a program. I am experienced in Fanuc controls, but, this is the first encounter with the OSP and any help would be appreciated.

  2. #2
    Join Date
    Dec 2010
    Location
    PA
    Posts
    666
    Post Thanks / Like
    Likes (Given)
    191
    Likes (Received)
    177

    Default

    Quote Originally Posted by j-weiler View Post
    I am starting up an LU35II with an OSP P300 control and am just wanting to write a start-up program to move the spindle and turrets around without setting tool coordinates or tools. I have no manuals and I can move the turrets in jog mode, but, not through a program. I am experienced in Fanuc controls, but, this is the first encounter with the OSP and any help would be appreciated.
    This is pretty rough off the top of my head but -

    G50 S500
    G0 X25 Z25
    V1=1
    N1000
    S500 M3 (clamp on something obviously)
    G0 G91 Z-10.
    X-10.
    X10.
    Z10.
    V1=V1+1
    IF [V1 LE 50] N1000
    M2

    If you want to run 100 times then change V1 LE 50 to 100. The X and Z 10 can be changed to whatever distance works in your machine. Just make sure you're not going to hit anything.


Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •