Jhendrickson
Plastic
- Joined
- Aug 7, 2017
Hey all,
I have a new to me 2000 MX-45VAE it has a high speed spindle, osp7000m and chiller. The chiller came to me with no wiring hooked up from the machine. I'm looking for wiring for the wires in the photos.
On the cooler there are terminals 8, 9, A, B, C, D, F the wires from the machine are N24A2, AH201, AH202, 11x42, and 12x11. There is also a N24A2 jumper. The power wires are pretty straightforward it's the control circuit that I'm struggling with.
Any help is greatly appreciated.
Thanks,
Joshua
Sent from my ONEPLUS A5000 using Tapatalk
I have a new to me 2000 MX-45VAE it has a high speed spindle, osp7000m and chiller. The chiller came to me with no wiring hooked up from the machine. I'm looking for wiring for the wires in the photos.
On the cooler there are terminals 8, 9, A, B, C, D, F the wires from the machine are N24A2, AH201, AH202, 11x42, and 12x11. There is also a N24A2 jumper. The power wires are pretty straightforward it's the control circuit that I'm struggling with.
Any help is greatly appreciated.
Thanks,
Joshua
Sent from my ONEPLUS A5000 using Tapatalk