Need Help with OKUMA MC-4VA OSP 5000 065 ALARM P SVP start FF00F310 & FF000000
Close
Login to Your Account
Likes Likes:  0
Results 1 to 1 of 1
  1. #1
    Join Date
    Jan 2019
    Country
    UNITED STATES
    State/Province
    Missouri
    Posts
    1
    Post Thanks / Like
    Likes (Given)
    0
    Likes (Received)
    0

    Default Need Help with OKUMA MC-4VA OSP 5000 065 ALARM P SVP start FF00F310 & FF000000

    I started the machine several weeks ago now. It booted up normally, but for only less than 60 seconds before it displayed the ERROR 065 P in the title of this post. Every time I restart I get one or the other of the 8 digit codes above. I checked everything for good connections including the main boards. I happened to have a spair Main ECP board with software loaded, so I changed it. I got the same errors. I swapped the two SVP boards and got the same errors. I swapped the X and Y axis Amps and got the same errors. I checked all encoder connrctions through the Power inlet electric cabinet and the control cabinet, with no change. I disconnected the Z axis encoder to see if there was a way to check the 12 volts it should see, but found no way to identify the wires. I did notice that the encoder was a "F" type although my prints say they are "E" type.

    My question is how do I check to see if I am getting 12 volts to the encoders and/or is that the right thing to be looking for? I feel like I'm running in circles and overlooking the real problem. The machine is old but only has 5000 hours. It looks like new.

    I would greatly appreciate any advice on how to recover this machine.

    Thanks,

    Don


Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •