We purchased a LB-15, mid to late 90s and cannot get the tailstock to actuate. Parameter is on, foot pedals wired correctly,the RU board is good
{ removed 1 from another machine and plugged this board in ], checked solenoid pins for free movement, pins move back and forth, dismantled solenoid and seems to be clean and working. The lights on the solenoid switch with pedal control and the magnet is warm on the retracted side. The hydro lines are cold on both sides at the tailstock. This is my 1st post, as I usually find what I need by reading threads.
Please tell me what i'm missing
Taterman
{ removed 1 from another machine and plugged this board in ], checked solenoid pins for free movement, pins move back and forth, dismantled solenoid and seems to be clean and working. The lights on the solenoid switch with pedal control and the magnet is warm on the retracted side. The hydro lines are cold on both sides at the tailstock. This is my 1st post, as I usually find what I need by reading threads.
Please tell me what i'm missing
Taterman