OSP7000L - chuck clamp delay/auto door issues
Close
Login to Your Account
Likes Likes:  0
Results 1 to 1 of 1
  1. #1
    Join Date
    Oct 2017
    Country
    AUSTRALIA
    Posts
    5
    Post Thanks / Like
    Likes (Given)
    39
    Likes (Received)
    3

    Default OSP7000L - chuck clamp delay/auto door issues

    Hi Guys,

    A couple of years ago I bought an old LU15 lathe, I'm fianally getting it setup to use.

    I'm having a couple of strange little issues.
    I'm sure they're really simple things to fix - but I can't work it out!
    I've done a bit of a search but can't really find what I'm looking for.

    Issues are as follows:

    1) There appears to be some sort of a delay/dwell set for the chuck when clamping.
    Hit the pedal, chuck opens straight away, as you would expect.
    Hit the pedal to close, there is an approx. 4 second delay.

    The issue remains when using ID clamp also (delay on clamp, even though direction has changed).
    So I'm inclined to think it is an programmed/controller thing rather than a physical fault/sensor issue.
    For what its worth, the issue remains whether using foot pedal or M83/M84.


    2) The machine has an auto door, it works fine with the buttons on the controller, it works fine when using M90/M91 in MDI mode, but when trying to use M90 (door close) at the begining of a program I just get a door open alarm.
    I can still use M91 (door open) at the end of the program with no issues.

    Any suggestions you guys might have are much appreciated!


Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •