christie628
Plastic
- Joined
- Nov 12, 2018
We bought a IRB1400 with a flexarc250R welding cell and need some help with the wiring.
This machine was previously ran with two other cells controlled by a Allen Bradly PLC. The plc was pulled and used for a different project in there company so we just got the cell and welding equipment.
My question is does anyone have the wiring diagram for the stock S4 Controller cabnet? Ive been in touch with abb and they dont support the system anymore and wouldnt give me anything. I just want to wire this machine up so that we can write programs with the teach pendant nothing special. Any advice is welcome!
This machine was previously ran with two other cells controlled by a Allen Bradly PLC. The plc was pulled and used for a different project in there company so we just got the cell and welding equipment.
My question is does anyone have the wiring diagram for the stock S4 Controller cabnet? Ive been in touch with abb and they dont support the system anymore and wouldnt give me anything. I just want to wire this machine up so that we can write programs with the teach pendant nothing special. Any advice is welcome!
