motion guru
Diamond
- Joined
- Dec 8, 2003
- Location
- Yacolt, WA
I have an application where I want to take an image with a Cognex camera and conduct an inspection and then record pass/fail along with the location of the artifact that was imaged. The location information can be sent via. ProfiNet to the camera / vision system.
I am a total newb with Cognex vision systems and thought I would see if there are any experts here who can guide me in this effort.
I have to inspect several hundred artifacts on a large part and I want to be able to identify every image by X,Y location embedded into the image if possible.
I am a total newb with Cognex vision systems and thought I would see if there are any experts here who can guide me in this effort.
I have to inspect several hundred artifacts on a large part and I want to be able to identify every image by X,Y location embedded into the image if possible.